Example3 In Case Of Connecting With Client Pc And Radar If - JRC JCY-1800 Installation Manual

Chapter9 Appendix
9.2.3 Example3
In case of connecting with Client PC and Radar IF
IP address assignment of Server and Client PC is default, and explains how to set when Server
PC is connected to Client 1, Client 2, Client3 PC and Radar IF.
Note
JCY-1800/1850
VDR/S-VDR
EXT-LAN *3
192.168.0.254
RJ-45
*1 Ethernet cable
(Shield Twist-Pair cable)
Max. 30m
VDR/S-VDR
Real Time Monitor
Server PC (*2)
192.168.0.251
NOTE
1. *1 Shielded LAN Cable(Cat5) : Dock Yard supply
2. *2 PC : Owner supply
3. *3 JCY-1800 : EXT-LAN
JCY-1850 : JRC-LAN
VDR/S-VDR Real Time Monitor & Onboard LAN (Example) INTERCONNECTION DIAGRAM
VDR/S-VDR Real Time Monitor / Installation Manual
Radar IF (NWP-46)
In the VDR/S-VDR equipment main Radar image is captured
and recorded, and it is possible to capture or record images of
sub Radar and ECDIS by the Radar IF in the VDR/S-VDR Real
Time Monitor.
On Board LAN System (Example)
LAN
AC
LAN
192.168.111.100
WAN
VDR IF(Router)
LAN
192.168.0.100
HUB
LAN
LAN
LAN
78
NWP-46
Radar IF
192.168.111.152
192.168.0.250
VDR/S-VDR
Real Time Monitor
Client PC1 (*2)
192.168.0.249
VDR/S-VDR
Real Time Monitor
Client PC2 (*2)
192.168.0.248
VDR/S-VDR
Real Time Monitor
Client PC3 (*2)