JRC JCY-1800 Installation Manual page 141

(2) In order to send the Script file to the VDR IF, connect the VDR IF setting cable as follows.
(3)Start the Hyper Terminal software, and set as follows.
Please refer to "9.3 Hyper Terminal Setup" for more detail.
Item
Bits per second
Data bits
Parity
Stop bits
Flow control
Emulation
Backspace key sends
Input Translation
(4)Input the following user name and password, and log into the VDR IF.
login: manager Enter
Password: friend Enter (No displayed)
Value
9,600bps
8
None
1
Hardware
VT100J
Delete
Shift－JIS(S)
VDR Real Time Monitor / Installation Manual
133
Chapter9 Appendix