In Case Of Server; Chapter8 Trouble Shooting - JRC JCY-1800 Installation Manual

Chapter8 Trouble Shooting

No. Symptom
1 The real time indication is not
possible.
2 The image indication is not
possible.
3 There are no audio outputs of
the real time.
4 The record is not possible.
5 The audio recording is not
possible.
6 The image recording is not
possible
7 Record data are less than a
record period.
8 When a LAN cable of the VDR
Real Time
disconnected, it is not possible
to playback.
Table8.1 In case of Server
Cause
Faulty wiring of a LAN cable
Initial setup for real time
output is not completed by
the Maintenance
yet.
The Power of a captured
display is not turned on.
Audio
validated.
Audio volume of the VDR
Real Time Monitor is low.
Or mute is validated.
Audio volume of the Windows
or is low.
Or mute is validated.
Faulty wiring of the external
HDD
The power of the external
HDD power is not turned on.
The audio recording is not
necessary.
The image recording is not
necessary.
The free space of the HDD is
not enough for the record
period.
The
Monitor is pressed and operation is in
the state of LAN connection.
software
monitoring is not
[Connect] button
VDR Real Time Monitor / Installation Manual
59
Chapter8 Trouble Shooting
Action
Check the connections.
Set the Option PC setup by the
Maintenance software.
⇒Refer to Chapter 5.
Turn on power of a captured
display.
Validate audio monitoring by
the Setup software.
⇒Refer to Table 6.5-2.
Adjust the Volume or invalidate
the Mute.
Adjust the Volume or invalidate
the Mute in the
Control" and "Wave".
Check the connections.
Turn on the power of the
external HDD.
Validate the record by the
Setup software.
⇒Refer to Table 6.5-2.
Validate the record by the
Setup software.
⇒Refer to Table 6.5-2.
Increase a free space by
deleting unnecessary data, or
exchange to a mass HDD
is In order to operate under
disconnecting the LAN, please
press the [Disconnect] button in
the Setup software.
⇒Refer to Table 6.5-3.
"Volume