Notes On Using - JRC JCY-1800 Installation Manual

Do not disassemble or remodel this equipment.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any AC/DC adaptor other than attachment.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any power supply voltage other than the specified voltages.
Such action may cause fire, electric shock, or an equipment fault.
Do not use any battery other than specification.
Such action may cause burst of a battery by liquid leak, fire, or injury.
Do not put containers into which it went, such as water, or a small metal thing on
this equipment top or near.
When water enters or a metal thing falls into the equipment, it becomes the cause
of a fire, an electric shock, and failure.
Do not damage a power cord or process it.
If put a heavy thing, heat, it pulls or it bends by force, a power cord will be
damaged and it may become the cause of fire and electric shock.
When a fault occurs, turn off the power supply of this equipment, remove the plug,
and contact the Sales Department of Japan Radio Company, nearest branch
company, branch office, sales office, or our agent.
Continuous use may cause fire or electric shock.
Do not check or repair the inside of the equipment by yourself.
Checking or repair by anyone other than the specialist maintenance staff may
cause fire or electric shock.
Request checking or repair of the inside of the equipment to the sales Department
of Japan Radio Company, nearest branch company, branch office, sales office, or
our agent.
< Notes on Using >
VDR/S-VDR Real Time Monitor / Installation Manual
iii

Notes on Using