JRC JCY-1800 Installation Manual page 29

Chapter6 PC (Server/Client) Setup
(4) Select the "Internet Protocol (TCP/IP)", and click the [Properties] button.
(5) Enter the IP address and the Subnet mask, and click the [OK] button.
If the IP address which is different from default is already assigned in the user LAN, click
the [Advance] button and go to (6).
And Add registration of the IP address shown in the Table 6.2-1 to the Server or Client
PC.
[Advance] button
VDR/S-VDR Real Time Monitor / Installation Manual
21