JRC JCY-1800 Installation Manual page 120

Vdr/s-vdr real time monitor
Hide thumbs Also See for JCY-1800:
Table of Contents

Advertisement

Chapter9 Appendix
STEP 2 Set IP Address of Server PC
Open the properties screen of Internet protocol (TC/IP) in the Windows control panel, and check
that the following IP address is registered into the Server PC.
・IP Address
・Subnet Mask
It is not necessary to set Default gateway for the VDR/S-VDR Real Time Monitor.
And then set the Server PC in accordance with the "6.2 Setup Items of PC".
VDR/S-VDR Real Time Monitor / Installation Manual
=192.168.0.10
=255.255.255.0
112
IP Address
/Subnet Mask

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jcy-1850

Table of Contents