Set Ip Address - JRC JCY-1800 Installation Manual

STEP 2

Set IP Address

Open the properties screen of Internet protocol (TCP/IP) in the Windows control panel, and set
the following IP address to the VDR/S-VDR Real Time Monitor PC.
・IP Address
・Subnet Mask
It is not necessary to set Default gateway for the VDR/S-VDR Real Time Monitor.
And then set the VDR/S-VDR Real Time Monitor PC in accordance with the "6.2 Setup Items of
PC".
STEP 3 Install the VDR/S-VDR Real Time Monitor software
Install the VDR/S-VDR Real Time Monitor software with the install CD.
When the Server/Client selection screen displayed, please select Server.
=192.168.0.251
=255.255.255.0
VDR Real Time Monitor / Installation Manual
67
Chapter9 Appendix
IP Address
/Subnet Mask