Chapter9 Appendix
(5)Delete the current script file by the "delete" command as follows.
Manager vdr_if> delete file=18firon.cfg Enter
(6)To send the changed script file, input the "load" command as follows.
Manager vdr_if> load method=zmodem asyn=0 destination=flash Enter
Router ready to begin ZMODEM file transfers . . .
(7) Select menu in order of "Transfer" and "Send File", and the following screen is indicated.
Click the [Browse] button, and select the changed "18firon.cfg" file, and click the [Send] button
to transfer.
Manager vdr_if> load method=zmodem asyn=0 destination=flash Enter
Router ready to begin ZMODEM file transfers . . .
・B000000023be50
Info (1048293): ZMODEM, session over.
(8) To validate the"18firon.cfg" file, input the "set" command as follows.
Manager vdr_if> set config=18firon.cfg Enter
VDR/S-VDR Real Time Monitor / Installation Manual
134