Kodak DryView 8150 User Manual page 77

Filter Change - Service Menu
Choice
Ping - Service Menu Choice
October 4, 2004
Selecting Filter Change on the Service screen displays the screen below.
Touch Yes to enter the current date into the Service History log as the date
of a filter change.
Selecting Ping on the Service screen tests the network connection between
the Imager and any modality on the network. You must know the IP address
of the modality you wish to test.
A keypad appears for entry of the IP address. To send a Ping, enter the IP
address of the modality and touch OK. The Imager sends a test packet to
the modality and waits for a reply.
If the Ping is successful, the following message screen appears:
7F3319
Operation and Maintenance
2-43