October 4, 2004
Open
Clamps
Opening the Drum Cover
3. Clear the jammed film from the processor area (there may be more
4. Close the drum cover and secure it with the two clamps.
5. Remove any films in Area 5. (See
6. Open the front door.
7. Remove all films in the lower part of the Imager.
8. Close the front door.
9. Close the hood.
than one sheet). If film is jammed in the drive rollers, pull the Plastic
Thumb Tab to the left to open the rollers and free the film.
The processor will have to warm to operating temperature before the
imager can resume printing.
7F3319
Troubleshooting
Open Drum
Cover
Plastic Thumb
Tab
page
3-16.)
3-15