Kodak DryView 8150 User Manual page 155

October 4, 2004
4. Choose the Image Density associated with the Table No. you chose.
If there is a range of density values:
• Choose the density value indicated in bold if there is one.
• If there is no bold value, choose the middle value. For example, if
the range is 2.7 to 3.1, choose 2.9.
• If there are only 2 density values, choose either one.
5. Choose the Smoothing Type from Table 1.
6. For Border Density on the film, choose a low density for a clear
border and a high density for a black border. Typically this density is
matched to the Image Density. (This parameter is not included in
Table 1.)
7. For Polarity of the film, choose either Positive or Negative. Positive is
used for most applications. Negative is used by Nuclear Medicine
modalities. (This parameter is not included in Table 1.)
8. Continue with "Entering the Image Quality Parameters" on page
7F3319
Optimizing Image Quality
5-10.
5-3