October 4, 2004
18. Send another clinical image from the modality to the Imager.
19. Wait for the Imager to print.
20. Examine the quality of the print.
21. Is the quality of the test print acceptable?
• Yes - Go to
"Changing the Modality ID" on page
• No - You can change image quality by adjusting individual image
quality parameters:
a. Select Image quality on the Modality defaults screen.
b. If the above information screen appears, Touch [X].
The Image Quality screen appears.
7F3319
Adding a Modality
4-10.
4-9