Kodak DryView 8150 User Manual page 69

Setup Local Panel Screen
October 4, 2004
From this screen you can access several other screens that allow you to
adjust some of the Local Panel properties.
To display this screen: Menu > Setup Imager > Local Panel
Calibrate touch accuracy - Displays a screen for setting the accuracy of
the touch buttons on the Local Panel. Requires the Service passcode.
Touch Beep Duration - Displays a screen for setting the duration of the
"beep" that sounds when any button is touched. Requires a Key Operator
passcode. Refer to "Adjust Touch Beep Duration" on page
Backlight intensity - Displays a screen for setting the intensity of the
Local Panel backlight. Requires a Key Operator passcode. Refer to
Backlight Intensity" on page 2-62
Audible alarm - Displays a screen from which you can:
• Enable or disable the audible alarm.
• Set the duration of audible alarm tone pulses.
The audible alarm sounds when the number of Jobs Waiting for Media goes
from 0 to 1 or when an Error Message screen is displayed. Requires a
Key Operator passcode. Refer to
Passcodes - Displays a screen for entering and editing passcodes
Requires the Service passcode. Refer to
page 2-57.
7F3319
Operation and Maintenance
"Adjust the Audible Alarm" on page 2-63
"Local Panel Passcodes" on
2-61.
"Adjust
2-35