Kodak DryView 8150 User Manual page 129

IP Address of the
modality that has
printed to the Imager
New Modality - that just printed
October 4, 2004
8. Wait for the following message screen to appear - about 1 minute.
(When a modality prints to the Imager for the first time, this message
will appear.)
NOTE: If this message does not appear, the modality may not be properly
set up to print to the Imager. Check the modality setup and re-send
the image.
9. Touch OK.
The modality that sent the image should now appear at the bottom of
the list of modalities.
7F3319
Adding a Modality
4-5