Table of Contents
Advertisement
Operator Action
October 4, 2004
NOTE: If you close an Error Message screen without correcting the
current error, you can recall the Error Message from the
Current Errors screen. (See
page
3-4.)
When an error message is displayed:
1. Silence the alarm by touching anywhere on the Error Message
screen.
2. Perform the corrective action recommended on the screen. If this
does not clear the error, call for service. (See
page
3-17.)
Note the error code and error message before you call for service.
The error message may direct you to perform one of the following actions:
• Restart the Imager.
1. Go to the Home screen.
2. Press the Power Off button.
3. Wait for the Local Panel to go blank.
4. Turn off the power switch on the back of the Imager and then turn it
back on.
• Open the front door manually. See
on page
2-49.
• Close the film cartridge. See
page
3-9.
7F3319
Troubleshooting
"Current Errors Screen" on
"Calling for Support" on
"Opening the Front Door Manually"
"Manually Closing the Film Cartridge" on
3-3
- Quick Links:
- How the Laser Imager Works
Hide quick links:
Advertisement
Table of Contents
