Kodak DryView 8150 User Manual page 128

Adding a Modality
Previously Configured Modalities
4-4
5. Select Modality (SCU) config.
6. Enter the Service User ID (99) and the Service Passcode on the
keypads that appear.
NOTE: If the new modality has previously printed to the Imager but has
not been configured, it will appear on the above list but without a
footprint symbol.
7. Send an Image from the new modality to the Imager.
• If this is the first time the new modality has printed to the Imager,
continue with step 8.
• If the modality has previously printed to the Imager, go to step
on page 4-6.
7F3319
10
October 4, 2004