Kodak DryView 8150 User Manual page 68

Operation and Maintenance
Select Modality Screen
2-34
Each of the modalities that has printed at least once to the Imager is listed
on this screen. Selecting one of the modalities leads to a series of
configuration screens that are used to enter and edit image quality
parameters for the selected modality.
The Service passcode is required to access this screen.
For modality setup procedures initiated from this screen, refer to
"Chapter 4 Adding a Modality".
To display this screen: Menu > Setup Imager > Modality (SCU) config
7F3319 October 4, 2004