Check-line DTMX-200 Manual page 15

6.41 Viewing Data In Continuous Data Logging Mode
To view data stored in the Extended Memory press the
The following will be displayed when the
Action Display Will Show
Press R key Maximum Value
ECALL
Press R key Minimum Value
ECALL
Press R key Peak Value
ECALL
Press R key Average Value
ECALL
Press R key Standard Deviation
ECALL
Press R key Date Point #1
ECALL
Press R key Data Point #2
ECALL
Press R key Data Point #100
ECALL
MAX
MIN
Maximum Value Minimum Value
100
Data Point 100
Each time the key is pressed the displayed value will change.
POWER
Press the
EXIT
6.42 To Clear All Data Stored In The Extended Memory.
Press the key and the
STORE
18
RECALL
key is pressed repeatedly.
RECALL
LCD Indicator
MAX
MIN
" P "
" A "
" d "
" 1 "
" 2 "
" 100 "
A
PEAK
Peak Value Average Value Standard Deviation
2
Data Point #2 Data Point #1
key at any time to exit the Recall Mode.
key simultaneously.
RECALL
6.11 Viewing Data In Standard Memory
key To view data stored in Standard Memory, press the
The following will be displayed when the
Each time the key is pressed the displayed value with change.
Action
Press R
Press R
Press R
Press R
1
Press the
6.12 To Clear All Data Stored In The Standard Memory
Press the
6.20 Standard Memory with No Auto Power Off (Standard - NAPO)
This memory mode is identical to the Standard Memory Mode detailed above,
except that when configured in this mode the power will not turn off
automatically after 90 seconds of inactivity.
Display Will Show LCD Indicator
key Maximum Value MAX
ECALL
key Minimum Value MIN
ECALL
key Peak Value PEAK
ECALL
key Last Reading none
ECALL
MAX
MIN
Maximum Value Minimum Value
key at any time to exit the Recall Mode.
POWER
EXIT
key and the
STORE RECALL
RECALL key.
key is pressed repeatedly.
RECALL
PEAK
Peak Value
Last Reading
key simultaneously
15