Sartorius ED224S-0CE Operating Instructions Manual page 16

Internal Calibration/Adjustment
(Only on Models with a Built-in Motorized Calibration Weight)
Standard feature on the following models:
– Models with a readability of 0.1 mg
– ED...-CW models
– GK... models
– GW... models
– Verified models (with the ...CE suffix)
Set the following parameters:
Setup: Bal.Scal.: Cal.-Adj.: Cal.Int. (menu code 1.1. 9. 4)
The built-in motorized calibration weight is applied and removed automatically for inter-
nal calibration.
Step
1. Tare the balance/scale
2. Start calibration
The built-in weight is
applied automatically
3. Calibration/adjustment executed
4. The built-in weight is removed
16
Key (or instruction) Display
w
Q
0.0
g
Cal.Int.
Cal. run.
Cal.end
0.0 g