Downloading Or Backing-Up A Configuration Or Log - Cisco 200 Series Administration Manual

Managing System Files

Downloading or Backing-up a Configuration or Log

STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Downloading or Backing-up a Configuration or Log
Cisco Small Business 200 Series Smart Switch Administration Guide
If for the Save Action you selected Backup to specify that a copy of the file type is
to be saved to a file on another device, do the following:
a. Source File Type—Select the configuration file type. Only valid file types are
displayed. (The file types are described in the
b. Click Apply. The File Download window displays.
c. Click Save. The Save As window displays.
d. Click Save.
Click Apply or Done. The file is upgraded or backed up.
Language Files
You can also remove a second language file from the switch if you have two
different ones installed. When you open the language menu, you will see the
option Delete Language.
Click Administration > File Management > Upgrade/Backup Firmware/
Language. The Upgrade/Backup Firmware/Language page opens.
Click Delete Language.
A confirmation window appears asking you to click OK to remove the file.
Click OK to remove the file.
If you already have a second language file and want to load another, you will
receive a confirmation window asking you to click OK if you want to replace the
existing language file with a new one.
Download/Backup Configuration/Log Page
The
configuration file types or the flash log on the switch to a file on another device or
the restoration of configuration file types from another device to the switch.
When restoring a configuration file to the Running Configuration, the imported file
adds any configuration commands that did not exist in the old file and overrides
any parameter values in the existing configuration commands.
Files and File Types
enables the backup from
4
section.)
35