Cisco 200 Series Administration Manual page 73

Configuring Discovery
Configuring LLDP
Cisco Small Business 200 Series Smart Switch Administration Guide
802.3 Power via MDI
• MDI Power Support Port Class—Advertised power support port class.
• PSE MDI Power Support—Indicates if MDI power is supported on the port.
• PSE MDI Power State—Indicates if MDI power is enabled on the port.
• PSE Power Pair Control Ability—Indicates if power pair control is
supported on the port.
• PSE Power Pair—Power pair control type supported on the port.
• PSE Power Class—Advertised power class of the port.
802.3 Details
• 802.3 Maximum Frame Size—Advertised maximum frame size that is
supported on the port.
802.3 Link Aggregation
• Aggregation Capability—Indicates if the port can be aggregated.
• Aggregation Status—Indicates if the port is currently aggregated.
• Aggregation Port ID—Advertised aggregated port ID.
MED Details
• Capabilities Supported—MED capabilities enabled on the port.
• Current Capabilities—MED TLVs advertised by the port.
• Device Class—LLDP-MED endpoint device class. The possible device
classes are:
- Endpoint Class 1—Indicates a generic endpoint class, offering basic
LLDP services.
- Endpoint Class 2—Indicates a media endpoint class, offering media
streaming capabilities as well as all Class 1 features.
- Endpoint Class 3—Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 switch support
and device information management capabilities.
• PoE Device Type—Port PoE type, for example, powered.
• PoE Power Source—Port's power source.
7
73