Configuring Lag Settings - Cisco 200 Series Administration Manual

Port Management
Configuring Link Aggregation
STEP 1
STEP 2
STEP 3
Cisco Small Business 200 Series Smart Switch Administration Guide

Configuring LAG Settings

LAG Settings Page
The
configure the settings of selected LAGs, and reactivate suspended LAGs by
launching the Edit LAG Settings Page.
To configure the LAG:
Click Port Management > Link Aggregation > LAG Settings. The
Page
opens.
Select a LAG, and click Edit. The
Enter the values for the following fields:
• LAG—Select the LAG ID number.
• Description—Enter the LAG name or a comment.
• LAG Type—Displays the port type that comprises the LAG.
• Administrative Status—Set the selected LAG to operational (Up) or non-
operational (Down).
• Operational Status—Displays whether the LAG is currently operating.
• Reactivate Suspended LAG—Select to reactivate a port if the LAG has
been disabled through the locked port security option.
• Administrative Auto-Negotiation—Enables or disable auto-negotiation on
the LAG. Auto-negotiation is a protocol between two link partners that
enables a LAG to advertise its transmission rate and flow control to its
partner (the Flow Control default is disabled). It is recommended to keep
auto-negotiation enabled on both sides of an aggregate link, or disabled on
both sides, while ensuring that link speeds are identical.
• Operational Auto-Negotiation—Displays the auto-negotiation setting.
• Administrative Speed—Select the LAG speed.
• Operational LAG Speed—Displays the current speed at which the LAG is
operating.
• Administrative Advertisement—Select the capabilities to be advertised by
the LAG. The options are:
- Max Capability—All LAG speeds and both duplex modes are available.
displays a table of current settings for all LAGs. You can
Edit LAG Settings Page
8
LAG Settings
opens.
85