Eneo TER-12N040200A User Manual page 49

49 | Full HD Digital Video Recorder
4.4.3 Notification

Remote Notify
The system can notify an alarm message to the IP address of CenPro Software over the network.
User can choose from a selection of different kinds of alarms by pressing "ADD." Alarms can be generated by Sensor,
Motion Detection, Disk Full, Admin PW Changed, Video Loss, and System Start.

E-Mail Notify
The system can send notification to an Email address the CenPro Software over the network. User can choose from a
selection of different kinds of alarms by pressing "ADD." Alarms can be generated by Sensor, Motion Detection, Disk Full,
Admin PW Changed, Video Loss, and System Start. By clicking "Use SSL", users can use a public email address such as
Yahoo, Google, Hotmail accounts. Type DVR name in the "DVR Name" box. The DVR name will appear in the email so that
users can recognize which DVR sent an email.
N
OTE Configuration's first priority is always given to "Schedule Setup " of the "RECORD" menu.
Thus, the system will not send alarm message or email notification upon motion alarm or sensor even
though user marks the checkbox of above event selection, unless user sets the "Schedule Setup" in the
"RECORD" menu.
For example, if user sets "Continuous" only for "Schedule Setup " of the "RECORD" menu and marks
the "All" checkbox in "REMOTE NOTIFY", then the system will not send alarm messages. In this case,
user has to set "C + M", "MOTION", "SENSOR" or "C+ S" for REMOTE NOTIFY or E-Mail NOTIFY to
function properly.