Eneo TER-12N040200A User Manual page 33

33 | Full HD Digital Video Recorder
- Schedule Reboot- Reboot the DVR on a designated date and
time. During the long time working, refresh the DVR
automatically
Click the Schedule Reboot button>
Check the 'USE' >Select week>Select day.
- NTP Setup- Setup the DVR to automatically sync with a
Network Time Protocol.
There are two types of TIME SYNC MODE:
Client Mode- The operating DVR is set as the client
o
DVR. Enter the IP address or URL of another DVR
or CenPro Software (CenPro), as a Time Sync
Server in "SYNC SERVER". This will cause your
DVR to sync its time with a Time Sync Server in the
set interval time.
- Display Options- Set sequence dwell time, pop-up camera, and OSD as indicated below:
OSD:
o





Set sequence dwell time- Setup how long the system will display each channel in Sequence mode, before
o
switching to the next channel.
You may select On/Off for Live or Playback status display by checking a check box.
o
- Screen Saver Setup- See section 3.13 Screen Saver for more information.
Select which information will be displayed in the OSD visible on each channel in Live.
Select which information will be displayed in the OSD visible on each channel in Playback.
Set the OSD's transparency level, the higher the percentage, the more transparent the OSD text
will appear.
Setup a dwell time for the OSD text, after which, the OSD will automatically disappear.
Setup a dwell time for the Setup Menu, after which, the Setup Menu will automatically disappear.