Eneo TER-12N040200A User Manual page 47

47 | Full HD Digital Video Recorder
Simply double click on the desired icon. Then, it will open an internet browser that connects to the DVR via the remote control
software as shown below. Please type in your User ID and Password to login and click 'Connect' button to connect.

Auto Private IP Setup (NAT Traversal)
The UPnP NAT Traversal function will help to automatically setup a router if the DVR connects to the internet via a router.
When a PC connects to a DVR, which is not in the same local area network, a real IPO address and corresponding port
number is required. However if the DVR is behind a router, the communication between the PC and the DVR will be
transmitted back and forth by the router. The router will need to setup port mapping (Port Forwarding) before images from the
DVR is remotely viewed on the PC. For each individual DVR, the setting needs to be done individually.
If the DVR has UPnP NAT traversal function, the setting of the router will be done automatically when it is enabled.
Just check 'Auto IP (NAT Traversal)' check box in the UPnP setup menu. Then it will take care of Auto IP detect by itself.
N
OTE The system transfers video images at real-time over the network even during no record.
For example, user can monitor live video even when motion has not occurred during motion detection
mode.
N
OTE If there is no physical network connection, it may take a few minutes for the system to start working, since
the network configuration in DHCP mode and the DHCP connection cannot be made.
DVR-04 DVR-05 DVR -06