Eneo TER-12N040200A User Manual page 42

PTZ Control mode
4.2.7 UTC
1) UTC set up
UTC is remotely set to camera OSD menu in the DVR. Select the proper protocol of the connected camera. Non-check the
'USE PTZ MENU' mode, set the menu and adjust as below.

Menu : Activate the camera OSD menu for setup and adjust

Up/Down arrow : move to categories

Right/Left arrow : Adjust the camera settings

Enter : Select the camera settings or enter the subcategories
2) To use UTC in the Live Mode
Select the single channel which adjust the camera set and change the PTZ Control mode.
Click the "+" at the center of screen for activating UTC
If it checked on the control, it keep move on the way.
Control any supported PTZ cameras by moving the mouse pointer.
Focus
Iris
Select the preset number and 'Set' button, 'Move' button is move to setting area
Activate the PTZ menu
Enter
Zoom In/Out
User's Manual | 42