Table of Contents
Advertisement
Basic Preprogramming
Before Admin. Programming
There are two ways to access and perform Admin. Programming functions:
Web ADMIN (refer to the MBX IP Web Admin. Programming manual)
DKTU (Station 100) Admin. Programming
All DKTU programming is conducted at Station 100 (MPB100/MPB300 DKT1 port) using a
LDP-7024D, KD-36D, or LKD-30/44 digital key telephone.
Additional programming stations may be assigned (PGM 121 - FLEX 5), but only 1 DKTU can
be active in the programming mode by default.
Upon entering Programming mode, Station 100 cannot operate as a normal telephone but as
a programming instrument with all of the buttons redefined. The keys of the dial pad are used
to enter the various data fields and to enter numerical information. The buttons located at the
side of the phone (Flexible Buttons) are used to indicate the specific data field and to enter
information. If the keyset doesn't have 3 soft buttons, the [SPEED] button is used to delete the
data and the [CONF] button is used to move to upper step.
Button Explanation
This model of an IP 8024 is a sample for the purpose of showing each button. Detailed
information about specific DKTUs and other keysets is described in the Terminal Connection
and Wiring Method section.
Release 1.0
8024 Button Description
MBX IP Hardware & Installation Guide
Chapter 7: Starting the MBX IP System
7-2
November 2010
Advertisement
Table of Contents
