Cable Wiring
Rack Mount Wiring
1. Ensure the BKSU
and EKSU have
been installed
correctly.
2. Connect cables to
the CO/STA port
and the
MOH/LAN/RS-232
C ports as shown
in the Figure
below.
3. Connect the Power
cord and the
Battery cable.
4. Tie all the cables
and the Power
cord (if desired)
through the holes
at both sides of the
rack mount bracket
using 6 tie cables
provided.
5. Finally tie all
cables to the Rack.
Release 1.0
Chapter 5: Terminal Connection and Wiring Method
MBX IP Hardware & Installation Guide
5-12
November 2010