Table of Contents
Advertisement
8 - DESCALING
Read all instructions carefully before performing the cycle in order to familiarise yourself with the process. Duration: about 20 minutes. NOTE: If the operations are not carried out
according to the indicated time, the machine will not start the descaling process. In this case, turn off the machine and repeat steps.
Limescale normally builds up with the use of the machine. Descaling allows to optimise cleaning and to remove limescale deposits from the inside.
If the descaling cycle is interrupted by a power failure or because the machine was turned off incorrectly, you must repeat the entire procedure before you can use the machine.
1
If the light is blinking yellow, it is necessary
to descale the machine.
5
Turn on the machine. Within 15 seconds press and
hold the
button for 4 seconds until you hear
the acoustic signal.
2
Turn off the machine and remove the capsule
holder.
6
The light will blink yellow.
3
Remove and fi ll the tank with fresh drinking water
up to the MAX level. Pour the descaling solution
and stir.
Note: The descaling cycle may be
paused by pressing the
button. To
resume it, press the
button again.
4
1 Litro
1 Liter
Place a container of at least 1 litre capacity under
the coff ee dispensing spout.
7
Within 2 minutes press the
button to start
the descaling cycle.
EN
15
Hide quick links:
Advertisement
Table of Contents
