Access Level Menus And Initial Screan; Starting Screen; Access Level 1 Screen; Access Level 2 Screen (Maintenance) - Teletek electronics SIMPO Basic Information

2.4) Access Level Menus and Initial Screan – the LCD panel is 4 rows, 40 symbols per row.
2.4.1) Starting Screen – the system is performing its initial start and is searching for new
devices.
2.4.2) Access Level 1 Screen – the initial screen after first start, reset or exiting from Access
levels 2 or 3. After saving the devices to the system „Installation mode" will disappear
and will appear "Active mode". Only silence buzzer is active.
T U E S D A Y
If any other button then the number buttons or "Silence Buzzer" is pressed the following
message will appear:
E n t e r
After valid code the command which was requested will be performed.
2.4.3) Access Level 2 Screen (Maintenance) – the user has to press any number button for
code introduction.
Press any number button from the front panel:
E n t e r
Introducing code :
Page 11 of 48
Simpo Addressable Panel
SIMPO - BASIC INFORMATION
S I M P O
I N I T I A L I Z I N G
1 5 - 0 3 - 1 1
* * A c c e s s
t o
a c c e s s
from the front panel's number buttons and hit "Enter".
2222
V e r s i o n
D e n i e d
I n t r o d u c e
c o d e :
1 . 0 0
1 0 : 2 7
* *
C o d e
* ? ? ? ? ?