Led Indication Description; Sounder - Teletek electronics SIMPO Basic Information

If access 2 or 3 is active and the installer do not perform action for 30 seconds, the
panel automatically returns in access level 1.

2.1.2) LED indication Description

LED Name
General Fire
General Fault
System Fault
Delay
Disable
Test

Sounder

Fault/Disable
Fire Confirmed
Page 7 of 48
Simpo Addressable Panel
SIMPO - BASIC INFORMATION
Activation
In case of fire alarm
event from automatic
detector, call point,
evacuation or external
device connected to
panel input.
In case of any fault in
the system.
In case of CPU crash.
In case of active delay in
the system.
If there is active delay in
the system.
If there is active test
procedure in the system.
If there is a fault in the
sounder output circuit or
the output is disabled.
If Input 1 is activated.
See page 3
Action
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Blinking/
Constantly ON
Constantly ON
Buzzer Action Colour
Yellow
Pulse Sound
Pulse Sound Yellow
One Pulse Yellow
Sound
One Pulse
Yellow
Sound
One Pulse Yellow
Sound
Pulse Sound
Yellow
One Pulse Yellow
Sound
Red