Teletek electronics SIMPO Basic Information page 28

- menu ADDRESSING has 3 submenus Set Address, Change Address and Start Self Addressing
(in the future there will be 4-th menu – Auto Addressing)
4 . 1 ) S E T
4 . 2 ) C H A N G E
4 . 3 ) S E L F
- Submenu Set Address looks as follows:
A D D R E S S :
In this menu an address can be set to new device for the system. The Apply button will appear only
the following requirements are met: there is a device with no address and the address which is
chosen is empty.
When the addressing is successful there will be a text "Successful" on the LCD screen. The apply
button will disappear. In case of no addressing "Error" message will appear.
Number change is done by use of the arrow buttons .
- Submenu Change Address looks as follows:
A D D R E S S :
In this menu an address can be set to an already existing device for the system. The Apply button
will appear only the following requirements are met: there is a device on the selected address and
the new address is empty.
Number change is done by use of the arrow buttons  and the jump over Address and New
Address with the use of the   arrow buttons
When the change of the address is successful there will be a text "Successful" on the LCD screen.
The apply button will disappear. In case of no addressing "Error" message will appear.
Page 28 of 48
Simpo Addressable Panel
SIMPO - BASIC INFORMATION
I N S T A L L E R
A D D R E S S
A D D R E S S
A D D R E S S I N G
 
U s e
0 0 3
A P P L Y
 
U s e
0 0 3
A P P L Y
A C C E S S
t o s e l e c t
S U C C E S S F U L
t o s e l e c t
N E W A D D R E S S :
S U C C E S S F U L
L E V E L
L O O P :
C H A N G E
0 0 6
L O O P :
C H A N G E
1
1