Buttons Description - Teletek electronics SIMPO Basic Information

Fire Output Fault
Protection
Confirmed
Protection Fault
Zone LEDs from
1 to 16
Silence Alarm
Power ON

2.1.3) Buttons Description

Button Name
Number Buttons
1,2,3 and 4
Silence Buzzer
Silence Alarm
Reset
Evacuate
Page 8 of 48
Simpo Addressable Panel
SIMPO - BASIC INFORMATION
If there is a fault in the
fire output circuit.
If Input 2 is activated.
See page 3
If Input 2 is activated.
See page 3
In case of fire event in
the respective zone.
In case of silence alarm
button is pressed.
220 V are present
Action
Functions in the system menu. Entering
access code.
Muting the internal buzzer (Exept Fault
in the Extinguish module)
Muting the main siren output
Reboot the panel
Overrides the sounders delays and
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
Constantly ON
no other active)
Access Level
Pulse Sound
Yellow
One Pulse Yellow
Sound
Pulse Sound Yellow
Yellow
Yellow
No Sound (In
Green
Buzzer
Action
2,3 None
1,2,3 Silenced
2,3
2,3 Initial
contiuous
sound
none