Teletek electronics SIMPO Basic Information page 38

-
Submenu Update
Menu for updating the firmware thru USB flash drive.
W o r k
3.) Panel's LCD and LED indication
Indication Groups:
Type
ALARMS
FAULTS
DISABLEMENTS
TESTS
WARNINGS
Indication structure:
Each group of events will be displaed as a button on the LCD screen,
starting from Button № 1 to № 4. Respectively to the priority of the event group,
the higest priority will be located under Button № 1 and the rest will follow on the
next buttons. Only for Group „Alarms" the number of the zones in FIRE condition
will be shown as an addition to the button: ALARMS: 005, which mean's that
there are 5 zones in fire. No matter what the last fire alarm will be indicated on
separate row. It is shown down below.
The P:02 will appear only if the event is from a network panel.
If all the groups are present in the same moment, only the first 3 will be
shown and the rest will be suppressed. The access to the rest will be possible
with one action button labeled „MORE>>":
0 0 1 F I R E
0 0 2 F I R E
0 0 5 F I R E
Page 38 of 48
Simpo Addressable Panel
SIMPO - BASIC INFORMATION
w i t h U S B
U S B O T G
Priority
HIGHEST
NORMAL
NORMAL
NORMAL
LOWEST
Z : 0 4
Z : 0 4
Z : 0 4
f l a s h
F S M S C H o s t
D : 0 5 6
D : 0 5 7
D : 0 5 8
U P D A T E
d r i v E
O P T I C A L 
P : 0 2
O P T I C A L
O P T I C A L 
