Ricoh Pro C5100S Operating Instructions Manual page 79

No.
73 [Txt Ppr: Ppr Trns Isolatn
Voltag: Side 2]
Fuser Adjustment
For details about the following items, see page 105 "Fuser Adjustment".
No.
74 [Fusing Heat Roller
Temperature Adj]
75 [Fusing Pressure Roller
Temperature Adj]
76 [Fusing Nip Width Setting]
77 [Adjust Fusing Temprtr to
Transfer Paper]
78 [Adjust Adding Fusing
Temperature 1]
79 [Adjust Adding Fusing
Temperature 2]
80 [Paper Feed Interval
Setting]
81 [Reduce Initial CPM: Low
Temp. Envrnmt.]
82 [Reduce Initl CPM:
Norml/High Temp Env]
83 [Adjust Cleaning Web
Motor Interval]
84 [Cleaning Web Contact
and Disengage]
85 [Fusing Nip Width Adj. for
Envelope]
Item
Adjust the separation voltage for secondary transfer
applied to Side 2 when Textured Paper mode is enabled.
Item
Adjust the heat roller temperature.
Adjust the pressure roller temperature.
Adjust the nip width between the fusing belt and pressure
roller.
Adjust the fusing temperature at which to allow paper
feeding after warming up.
Adjust the fusing unit's accumulated temperature for a
specific time after a job starts.
Adjust the fusing unit's accumulated temperature for a
specific time after writing starts.
Adjust the interval between the feeding of each sheet.
Select one of the three levels of copy/print speed
reduction at low temperatures.
Select one of the three levels of copy/print speed
reduction at normal room temperature and above.
Specify the interval between each activation of the
cleaning web.
Specify how the cleaning web comes into contact and
separates.
Adjust the nip width between the fusing belt and pressure
roller when an envelope is being fed.
Menu Items and Functions
Description
Description
77