Ricoh Pro C5100S Operating Instructions Manual page 38

2. Details of Menu Items in Adjustment Settings for Skilled Operators
Lubrication makes the surface of the intermediate transfer belt smoother, which extends the life of the
cleaning unit for the intermediate transfer belt.
This operation takes about five minutes during which a message appears on the control panel.
After you have replaced the cleaning unit for the intermediate transfer belt, lubricate it. For details about
lubricating the unit, see Replacement Guide.
[Execute ITB Manual Lubrication]
0304: [Tighten Fusing Cleaning Unit at Replacement]
Tighten the cleaning web after replacing it.
If the cleaning web becomes loose, it may fail to perform cleaning properly and dust and toner will be
left on images. Tighten the unit after replacing the cleaning web. For details about replacing units, see
the Replacement Guide.
This operation takes about one minute. During this operation, a message appears on the control panel.
Do not pull out the drawer while the message is being displayed.
[Tighten Fusing Cleaning Unit]
0305: [Reset Replaceable Parts Counter]
Reset the counter for replaceable parts.
Replace a unit and then the counter for the unit. For details about replacing units, see the Replacement
Guide.
0306: [Replaceable Parts Counter]
Display the counters for replaceable units.
0307: [Target Value for Replaceable Part]
Display the values at which replaceable units must be replaced.
When a counter reaches the specified value, a message reporting that the corresponding unit must be
replaced appears.
36
Setting Items
Setting Items
Values
Press [OK].
Values
Press [OK].