Ricoh Pro C5100S Operating Instructions Manual page 23

No.
0413 [Adjust Claw Shift for
Center Folding]
0501 [Adjust Staple Position]
0502 [Adjust Punch Position With
Feed Direction]
0503 [Paper Alignment for
Stapling Across Feed
Direction]
0504 [Paper Alignment for
Stapling With Feed
Direction]
0505 [Paper Alignment in Shift
Tray Across Feed Direction]
[Finishing: Fold]
For details about the following items, see page 55 "[Finishing: Fold]".
No.
0601 [Half Fold Position (Multi-
sheet Fold)]
0602 [Letter Fold-out Position 1
(Multi-sheet Fold)]
0603 [Letter Fold-out Position 2
(Multi-sheet Fold)]
Item
Adjust the paper alignment in the paper feed direction
for center folding.
Adjust this setting if the paper alignment in the paper
feed direction is inaccurate because of inconsistent
paper size and paper curling when using certain types of
paper.
Adjust the vertical position of the staples when using
Finisher SR4110.
Adjust the horizontal position of the punch holes when
using Finisher SR4110.
Adjust the width of the staple jogger for edge stapling in
order to reduce vertical variation in paper alignment due
to difference in size, thickness, and paper curl when
using Finisher 4110.
Adjust the travel distance of the paper edge stopper for
edge stapling in order to reduce horizontal variation in
paper alignment due to difference in size, thickness, and
paper curl when using Finisher SR4110.
Adjust the width of the paper alignment jogger in the shift
tray in order to reduce vertical variation in paper
alignment due to difference in size, thickness, and paper
curl when using Finisher SR4110.
Item
Adjust the fold position of half folded sheets when using
the multi-folding unit.
Adjust the fold position for the bottom segment of letter
fold-out sheets when using the multi-folding unit.
Adjust the overall fold size of letters fold-out sheets when
using the multi-folding unit.
Menu Items and Functions
Description
Description
21