Ricoh Pro C5100S Operating Instructions Manual page 20

2. Details of Menu Items in Adjustment Settings for Skilled Operators
No.
0207 [Adjust Fusing Temperature
on Standby]
0208 [Auto Color Selection
Setting]
0209 [Photoconductor Special
Mode]
0210 [Fusing Belt Smoothing]
0211 [Fusing Ability by Paper
Feed Speed]
[Machine: Paper Feed/ Output]
For details about the following items, see page 32 "[Machine: Paper Feed/ Output]".
No.
0103 [Adjust Registration Paper
Buckle]
0104 [Adjust Registration Paper
Buckle (Thick Paper)]
0106 [Criteria for Paper Weight]
0140 [Buffer Pass Unit Fan
Activation Setting]
[Machine: Maintenance]
For details about the following items, see page 35 "[Machine: Maintenance]".
No.
0301 [Execute Cleaning Initial
Setting]
0302 [Execute Process Initial
Setting]
18
Item
Adjust the set fusing temperature according to the
machine status.
Specify the number of sheets the machine prints in full
color mode before switching to black-and-white mode
when printing a job which involves full color printing
followed by black-and-white printing.
Increase the amount of lubricant applied to the
photoconductor.
Polish the fusing belt to eliminate the scratches caused by
paper edges.
Specify appropriately to improve transferability to thick
paper.
Item
Adjust the degree of paper arching at the registration
gate.
Adjust the degree of paper arching at the registration
gate when using paper of Paper Weight 5 to 7.
Specify the criteria for identifying the paper weight.
Select when the buffer pass unit fan is to operate.
Item
Initialize the cleaning unit for the photoconductor unit
(PCU).
Initialize print settings at once.
Description
Description
Description