Ricoh Pro C5100S Operating Instructions Manual page 101

Use this to reduce image quality degradation at the trailing edge of the paper.
Press [+] to increase the length of area at the trailing edge to apply the current and [−] to reduce it.
Setting Items
[Paper Transfer Current; Trail Edge Dist:
B&W]
53: [Ppr Transfer Current Trail Edg Dist: FC]
Adjust the area at the leading edge of the paper for application of paper transfer current.
Specify the length of area at the trailing edge of the paper to which the current set in 51: [Paper Transfer
Current; Trail Edge: FC] is applied.
Use this to reduce image quality degradation at the trailing edge of the paper.
Press [+] to increase the length of area at the trailing edge to apply the current and [−] to reduce it.
Setting Items
[Paper Transfer Current; Trail Edge Dist: Full
Color]
54: [Ppr Trns CV Start Timing: B&W: Side 1]
Adjust the timing to start constant voltage control for the bias on Side 1 during paper transfer when
printing in black-and-white mode.
Use this to adjust transferability at the leading edge of the paper.
Press [+] or [−] to adjust the start timing.
• For the bias during paper transfer at the start of printing, the machine performs constant voltage
control and then switches to constant current control. If you set "CV Start Timing" to "50ms" and "CV
Control Duration" to "30ms", constant voltage control for the paper transfer bias starts 50
milliseconds before printing a sheet and lasts for 30 milliseconds,. This is followed by constant
current control for the remaining 20 milliseconds, after which printing starts.
Setting Items
[Ppr Trns CV Start Timing: B&W: Side 1]
Max. Value Min. Value
100 0
Max. Value Min. Value
100 0
Max. Value Min. Value
100 0
Setting Values
Step Unit
1 mm
Step Unit
1 mm
Step Unit
1 ms
99