Parameters Setup Procedure - Enter Into Setup - Easson ES-12 Operation Manuals

Parameters Setup Procedure - Enter into SETUP

Followings are the control keys that are used in the SETUP function.
Parameters
display window
Axis selection keys
Operating Procedure of SETUP function :
To enter into the SETUP procedure, after the ES-12 is switching on with software version showing in the
MESSAGE window, press the "ent" key to enter into the SETUP function.
1) Switch off the ES-12.
2) Switch on the ES-12, after switching on with the software version no. "VER. X - ?" in the
message window, press "ent" key to enter the parameter SETUP function.
X 8888.8888
Y 8888.8888
Z 8888.8888
8888.8888
U
EASSON
2 ) Press or
SETUP is "DRO TYPE" which specifies the FUNCTION TYPE of the ES-12.
X
Y
Z
U
SET UP .
X
Y
Z
ABS
key to select next function in the menu, the next function after the
- B. 5 -
mm
function message
display window
mm
mm
Function selection keys
Parameters value
entry keys
X
Y
Z
U
SET UP .
DRO displays "SET UP" means
DRO have entered into the
SETUP function
X
Y
Z
U
DRO TYPE.
ES-12 displays "DRO TYPE" means
ES-12 is currently in FUNCTION TYPE
selection entry function for user
to specify the DRO Function type.