Basic Functions - Centre Find - Easson ES-12 Operation Manuals

Purpose : ES-12 provides centre find function by halfing the current display coordinate, so that the zero
position of the work piece is located at the centre of the work piece.
Example : To set the current X axis zero position at the centre of the work piece
Step 1 : Locate the edge finder at one end of the work piece, then zero the X axis.
X -34.560
Y 0.000
Z 0.000
ABS
Step 2 : Located the edge finder at the opposite
end of the work piece.
Step 3 : Then half the display coordinate using centre find function as per follows
X 78.480
mm
Y 0.000
mm
Z 0.000
mm
ABS
Now the X axis zero position ( 0.000 ) is located right at the X centre of the work piece

Basic Functions - Centre Find

mm
mm
mm
X
0.000
Y
0.000
Z
0.000
ABS
- 3 -
0.000
X
mm
0.000
Y
mm
0.000
Z
mm
ABS
X 78.480
mm
0.000
Y
mm
0.000
Z
mm
ABS
X 39.240
mm
Y 0.000
mm
Z 0.000
mm
ABS
mm
mm
mm