Parameters Setup Procedure - Dial Inc - Easson ES-12 Operation Manuals

Z DIAL menu is designed to allow user to specifies the Z axis machine increment per line mark of the Z Dial.
This his paameter is used only for the two axes ES-12 which intent to use the ARC or R function for XZ/YZ plane arc.
This parameter allows an two axis ES-12 to silmulate the Z axis movement for ARC or R machining function.
For three axes ES-12, this parameter ( DIAL INC ) is not used, no effectiveness.
For Example :
The DIAL INC is the Z dial increment per line mark in the Z axis dial of the machine. e.g. The DIAL INC is 0.02mm
Press to select the "DIAL INC" selection menu
X
Y
Z
U
DIAL. INC
X
0.020
Y
Z
U
DIAL. INC
X
Y 0.020
Z
U
DIAL INC
then press to exist from
"Z DIAL" menu and return to
the top level menu

Parameters Setup Procedure - DIAL INC

0
- B. 20 -
The Z movement per line mark
of the Z Dial is displayed on
the DRO
X
0.020
Y
Z
U
DIAL. INC
X
0.020
Y
Z
U
DIAL. INC
X
Y
Z
U
DIAL INC
selection done,
go to next menu