Basic Functions - Vibration Filtering - Easson ES-12 Operation Manuals

Purpose : Vibration filtering is especially useful for old and big machines in which the machine structure is not
rigid enough to get a stable display during machining or moving. when the machine is moving or
machining in one axis, the other axes may vibrate and hence the DRO display numbers are jumping
around which may cause confusions and uncomfortable position visualization to the operator.
ES-12 provides vibration filtering function to stabilize the digits display, it make the operator more
comfortable during the position visualization. Filtering bandwidth parameter can be set in SETUP
procedure to adopt the different condition of the machine.
To have the most sensitive display for manual machine positioning, it is advisable that the operator to
cancel any vibration filtering to get the most sensitive and fastest response position display to make
the manual machine positioning more comfortable to operate. When the machine is moving by the
power feed or making the parts cutting, it is prefer that to put the vibration filter on to have more
comfortable position readings visualization.
Therefore, ES-12 provides easy swap between filtered and non-filtered displays by just a simple key
buttion press !
Example : To activate the vibration filter, press
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
To cancel the vibration filter, press
When Vibration filter
is on, the LEFT more
digit of the message
window will flashing
to indicate vibration
filtering is ON.
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
please notice that the vibration filter won't affect the accuracy of the position display,
it cannot make the DRO display reading more accurate or less accurate !!

Basic Functions - Vibration Filtering

ce
button for more than 0.6 sec.
press for more than
0.6 sec.
ce
button for more than 0.6 sec again.
ce
press for more than
0.6 sec.
ce
- 6 -
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
When Vibration filter
is on, the LEFT more
digit of the message
window will flashing
to indicate vibration
filtering is ON.