Basic Functions - Speed - Easson ES-12 Operation Manuals

Basic Functions - SPEED [ axial cutting speed display ]
Purpose : To make sure the machining surface finished is consistent, operator must know exactly how much the
machine travel speed is for the machining ( such as cutting, facing and etc.. ).
ES-12 provides the SPEED function to display the machine moving speed in mm/min in all selected axis.
The SPEED display is filtered by an 0.25 sec display filter to provide stabilized speed display, to enable
the operator to adjust the machine's power feed at a more easy and comfortable speed visualization.
The display resolution of the SPEED function is in mm/min, which is the most commonly used unit in
machine feed rate in CNC machining or cutting tool feed calculations. SPEED function is very useful in
monitoring many common machining process ( such as cutting, facing and etc.. ) to achieve
predictable surface finish or to achieve predictable cutting tool life.
Example : To activate the SPEED display of X Axis, press
X moving speed display will be displayed in message window. Same operation for
Y, Z and U axis.
normal display mode
X
56.785
Y
12.345
Z
45.785
ABS
Please notice that during the SPEED display mode, all DRO functions are temporarily disable !
Operator have to exit the SPEED display mode to carry out any normal DRO functions
To exit the SPEED display mode and return to normal display mode, press
SPEED display mode
X
56.785
Y
12.345
Z
45.785
XS: 0 mm/min
ABS
press for more than
0.6 sec.
mm
mm
mm
ce
mm
mm
mm
Axis button for more than 0.6 sec. Then the
SPEED display mode
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
XS: 0 mm/min
ABS
normal display mode
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
- 5 -
XS - X SPEED display
YS - Y SPEED display
ZS - Z SPEED display
US - U SPEED display
ce