Basic Functions - Xz/Yz Axes Summing - Easson ES-12 Operation Manuals

This function available only when the 3 Axes DRO configured to DRO TYPE = LATHE
Purpose : The Axes Summing function is a useful function for LATHE application.
ES-12 provides the axes summing function for providing temporarily summing display of XZ
and YZ axes, operator can swap back to the orginal displays ( X/Y/Z individual display with no
summing of axes ) at any time they want.
The summing function is useful when two linear scales are installed on the cross slide of lathe.
The summing function allow the operator to have direct combined reading of these two linear
scales for the tool tip positioning, this make machining more easier and less mistake.
Example : To get the summing display of X and Z axes
( the same operation if we want summing the Y and Z axes, if we want YZ summing, just replacing
the X axis button key press with Y axis button key press as per following example. )
enter the Z axis function
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
press X axis button key
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ENTR. VAL
ABS
Please notice that when the display is in axes summing mode, all DRO functions are temporarily
disabled to avoid confusion and mistaken operation !!
To exit from Axes summing display mode, return to normal X/Y/Z display, press
Axes summing display
X
102.570
mm
Y
12.345
mm
Z
45.785
mm
SU - 1
ABS

Basic Functions - XZ/YZ Axes Summing

Z
X
ce
- 7 -
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ENTR. VAL
ABS
Axes summing display
X 102.570
mm
Y
12.345
mm
Z
45.785
mm
SU - 1
ABS
In the axes summing display mode, the Z axis will
turn off to avoid possible confusion to the operator.
Message "SU-1" or "SU-2" to let the operator know
which axis have summed with Z axis.
normal X/Y/Z display mode
X
56.785
mm
Y
12.345
mm
Z
45.785
mm
ABS
SU-1: Summing axis 1( X )
SU-2: Summing axis 2( Y )
ce