Linear Transducer Connection; Switching On - Easson ES-12 Operation Manuals

LINEAR TRANSDUCER CONNECTION

2.3 LINEAR TRANSDUCER CONNECTION
Connection sockets as shown in Figure 2.3. The transducers are connected to the DRO with 9-pin DB
Type connectors.
Switch off the DRO before connecting or disconnecting the linear transducers. To fit the connectors
into the appropriate socket on the back of the DRO, first align the connector and then push firmly in place.
And secure with the screws. To remove the connectors, loosen the screws and pull the connector clear.

2.4 SWITCHING ON

Find the power switch as shown in Figure 2.3.
When the operators switch on the DRO, the DRO will automatically go through a brief self diagnostic routine.
IV