Parameters Setup Procedure - Z Dial - Easson ES-12 Operation Manuals

Z DIAL menu is designed to allow user to specifies the Z axis machine increment per dial turn.
This his paameter is used only for the two axes ES-12 which intent to use the ARC or R function for XZ/YZ plane arc.
This parameter allows an two axis ES-12 to silmulate the Z axis movement for ARC or R machining function.
For three axes ES-12, this parameter ( Z DIAL ) is not used, no effectiveness.
For Example :
The Z Dial is the Z axis machine movement per Dial turn. e.g. The Z movement per dial turn is 2.5mm.
Press to select the "Z DIAL" selection menu
X
Y
Z
U
Z. DIAL
X
2.500
Y
Z
U
Z. DIAL
X
2.500
Y
Z
U
Z DIAL
then press to exist from
"Z DIAL" menu and return to
the top level menu

Parameters Setup Procedure - Z DIAL

- B. 19 -
The Z movement per Dial turn is
displayed on the DRO
X
2.500
Y
Z
U
Z. DIAL
X
2.500
Y
Z
U
Z. DIAL
X
Y
Z
U
Z DIAL
selection done,
go to next menu