Programming Examples - Mitsubishi Electric FR-E5NC Instruction Manual

6. PROGRAMMING EXAMPLES

6 PROGRAMMING EXAMPLES
This chapter provides programming examples which control the inverter with sequence programs.
Item
6.1 Reply code definitions
6.2 Reading the inverter status
6.3 Setting the operation mode
6.4 Setting the operation commands
6.5 Setting the monitoring function
6.6 Reading a parameter value
6.7 Writing a parameter value
Over of the Functions
6.8
"acceleration time"
6.9 Reading the alarm definitions
6.10 Inverter reset
System configuration for programming example
List of codes checked after completion of instruction code execution
Reading the inverter status from the buffer memory of the master
station
Selecting the CC-Link operation mode
Commanding the forward rotation and medium speed signals
Monitoring the output frequency
Reading the value of Pr. 7 "acceleration time"
Setting "3.0 seconds" in Pr. 7 "acceleration time"
Setting to 50.00Hz
Reading the inverter alarms
Resetting the inverter
PLC
Master
Power
CPU
station
supply
(X/Y00 to 1F)
31
PROGRAMMING EXAMPLES
Program Example
X0020
Input
module
(X20 to X2F)
Station 1 Station 2
Inverter
Inverter
(1 station
(1 station
occupied)
occupied)
FR-E5NC FR-E5NC
Refer to Page
32
33
34
35
36
38
39
40
42
44