Dolby Lake Processing And Controller; Smaartlive Integration; Dante Audio Network - Lab.gruppen PLM Series Operation Manual

WELCOME 4

4.2.3 Dolby Lake Processing and Controller

The PLM Series integrates seamlessly into the
Dolby Lake processing environment. Two processing
modules offer precise settings for gain, delay,
crossover slope, equalization and limiting. Dolby Lake
processing features incorporated in each module
include Raised Cosine Equalization, linear phase
crossovers and LimiterMax™ loudspeaker protection.
The Super Module feature allows hardware processing
modules in two or more separate PLM Series units
to function as a single module in the Dolby Lake
Controller PLM Edition software interface. (See
section 8.2 and the separate Dolby Lake Controller
User Manual.)

4.2.4 smaartLive integration

The Dolby Lake Controller PLM Edition enables
seamless, plug-in integration of the industry-standard
SmaartLive analysis system. With this feature,
operators can measure with SmaartLive and make
EQ adjustments at the same time, using the same
software controller on a Wi-Fi enabled Tablet PC.
(See the separate Dolby Lake Controller User
Manual.)

4.2.5 Dante audio network

All PLM Series products include Dante digital
audio networking as standard. Based on the latest
advances in networking, Dante offers simplified
system configuration and extremely low latency
while delivering very high quality uncompressed
digital audio over the entire PLM Series network.
The Zen™ automatic configuration feature enables
"plug-and-play" setup without third-party DHCP or
DNS servers. Dante is fully compatible with new
high-bandwidth network backbones, allowing high
channel counts while also transporting third-party
control protocols through the same network.
PLM Series Operation Manual 9