Table of Contents
Advertisement
SmartLock Feature
The purpose of the SmartLock feature is to prevent the doors from unwanted
unlocking/locking when entering/exiting the active zone multiple times for a
pre-programmed delay (No delay*,1, 3 or 5 minutes). This is practical in situ-
ations such as loading/unloading packages.
*SmartLock feature is disabled when it is set to no delay, which is only con-
figurable by your authorized dealer.
Note: If the Door Open Interlock feature is enabled, the SmartLock feature will
not be able to lock a door when it is left opened.
To use the SmartLock feature, the following sequence must be performed:
1.
Exit the active zone with the valid key fob in hand. This action will lock
the doors and initiate the pre-programmed timer.
2.
Re-enter the zone within the pre-programmed delay (1, 3 or 5 minutes)
to activate the SmartLock feature. As long as you are still within the pre-
programmed delay and have the valid key fob in hand, the doors will
unlock.
3.
At this point, the SmartLock timer is reset and frozen. If you exit the zone
with the valid key fob, the doors will not lock and a fresh timer will start.
4.
Again, if you re-enter the zone within the pre-programmed delay, the
doors will not unlock since the door is already unlocked from step 2.
5.
If step 3 and 4 are repeated many times, the lock/unlock operation will
never occur thus making it convenient during loading/unloading, as long
as the doors are not opened or closed during the whole sequence.
6.
Once the valid key fob remains out of the active zone longer than the
pre-programmed delay, the doors will automatically lock. At this point,
the Smartlock feature will be disabled. It is important to note that the user
can always lock the doors immediately at any moment by quickly press-
ing and releasing the key fob button (See "Manual unlocking and locking
of the vehicle" on page 7).
10
© 2012 Directed. All rights reserved.
Advertisement
Table of Contents
